Hacker News

I’ve worked in appliance repair and have worked on induction cook tops.

I wouldn’t recommend buying one. The fancier models have a stupendous number of circuit boards in them, and obviously a lot of power electronics, as well as cooling fans. Probably buy the cheapest model with the least number of features that you can bear the sight of, style matters in a kitchen, if you have to buy one at all.

I’ve simplified by cooking to an electric pressure cooker, which also functions as a slow cooker and pot for frying, an air fried, and a microwave. No kettle, no pots or pans, no cooktop, no oven. An oven would be useful I suppose if I were cooking for more people. The pressure cooker plus air frier is a faster and more convenient substitute for roasting meat.

As they become more common and age, I predict induction cooktops will have a much higher failure rate than dumb rheostat controlled resistive element cooktops. Everything has a much higher failure rate than dumb resistive element cooktops. And they are much easier to repair with very few parts: a resistive element and a rheostat.

I’ve don’t quite a good many replacements of fully functional dumb resistive cooktops and ovens with the new version of the same model, simply because the 70 to 80 year old residence wanted something newer and shinier, even though the new model is almost identical to the 20 to 30 year old model they’re replacing.

Improper installation of induction cooktops in older kitchens with out the necessary cabinet work to correctly ventilate them is a big problem too.

Anyways, gas is a great source of energy especially for commercial and industrial cooking and heating, where electric is simply impractical due to the immense amount of power required.

At home, sure. The typical setup requires less than 10kW. Trivial.

In a food court or restaurant strip currently serviced by gas, the electricity requirement could easily exceed 1 megawatt, which means major infrastructure upgrades, and you’ll never get the rapid heat control like gas provides, which is essential in reasonable service times, along with the fact that gas cookers are infinitely simpler and have very low failure rates compared to anything electric that is put through repeated thermo cycling 16 or 24hrs a day.

“People used to cooking with gas, cook better with gas”

Induction offers the benefits of not emitting noxious fumes, the dangers of transporting gas over long distances in bulk, the fire hazards inside the home, and dependency on single source energy.

Electricity, via induction cooktops, is often faster, more energy efficient, safer for everyone, and doesn’t depend on whatever regime or state wants to play games with the supply. Where I live, electricity is often sold at negative rates for most of the day and that electricity is now going into batteries at a massive scale. It seems unlikely gas has any future, outside of niche cooking or industrial/commercial uses.

I see some places in the Japanese countryside where homeowners get propane tanks delivered to them for cooking? I believe in an earthquake prone country, this is safer than having natural gas piped to their homes?

The problem I think is that Japanese culture values hot baths daily. Heating water for the bath using electricity is still too costly.

At the plastics plant I worked at in the 2010's, they had seismic emergency valves for the natural gas. At the time, I thought they were such a pain, as the vibration caused by a semi-trailer bumping a warehouse dock could cause them to shut off. (But it only took a screwdriver and 2 minutes to reset the valve.)

Now I'm thinking such valves are a good measure. I have no idea if they could work in such a major quake, though - for example, if the gas line fractured farther back from the seismic cutoff valve?

odd not to mention resistance heating in what otherwise seems like a thorough review of the question

The study doesn't appear to be blind (not sure how you can do a blind cooking test). Also, The panellists were satisfied with cooking when they could control the heat as desired suggests inexperience with electric is a part of preference (as a personal anecdote, it took me a few months to get used to an electric stove in a new house after a lifetime of cooking on gas). This is also over a decade old. There have been some advancements in electric cookery since.

The one place gas makes sense is heating in cold climates because furnaces are externally vented.

We use 400V in Europe (in the most modern infrastructure, probably since the early 2000s) and have roughly 1.7x the power of gas for cooking. Gas measures at around 4.5kW and the modern induction stoves are at 7.5kW (old "ceran" electric cooking fields are 3.5kW)

You wouldn't multiply the volts, you'd multiply the amps, by using a separate sub-breaker for each shop, which you're doing anyway since you want to meter them separately.

This is already the norm in lots of Europe. It's not some weird new thing. In Sweden, no mall food courts have natural gas hookups, it's all three-phase electrical appliances. It's been like this forever (since Sweden has craploads of hydro and nuclear and zero gas).

I agree there's a huge amount of energy that would need to go into a commercial kitchen to replace gas, and I also agree its probably a bit unfeasible at a lot of locations with current technology to do it at any reasonable scale and have it be economically efficient.

However, you're not really being honest by suggesting things have to either be 110VAC or 5,000V. Even residentially, an electric range isn't often going to be operating at 110VAC aide from some portable single burner things, you'll likely see them operate at 208V or 240V. And when it comes to commerical equipment it'll likely be three-phase, so its not like you need a single massive conductor running thousands of volts to power it. For something like a shopping mall, you're already likely to have some pretty massive electrical infrastructure feeding the facility running at something like 13.8kV. At that step down point, do a few big 480Y three-phase runs over towards the food court, then do 208Y three-phase to the ranges.

To be fair though, I'm mostly speaking from a US-grid mindset here. I don't really know the specifics about what would be done in Japan, but I imagine it would be somewhat similar. I'm also not necessarily arguing they should do it, but its not as impossible or ridiculous as you're making it seem.

haha who is cooking on 5kv?

About 40% of the electricity coming to my house from the grid is from renewable sources, and I live in a state where if it was ranked against countries around the world would be the 3rd biggest natural gas producer.

[delayed]

Gas has more raw power but it's extremely inefficient because most of it just escapes into the room, whereas with induction it all goes into the cookware. Our induction stove boils water way faster than our gas one did, and the gas one on full blast melted and ruined the handle on the pot since so much of the heat escapes around the sides.

Technology Connections on YouTube has done videos on the topic, comparing electric to gas, showing that even old-school resistive electric is faster than gas https://www.youtube.com/watch?v=_yMMTVVJI4c https://www.youtube.com/watch?v=eUywI8YGy0Y

https://www.impulselabs.com/ achieves this by storing energy in a battery. 120V15A in to charge, 10kW out for short durations. I don't have one, but it's an interesting concept.

That said, I don't know what's better, a massive lithium battery in the kitchen that can be set into thermal runaway, or a gas line.

But also, most Japanese styles of cooking doesn't need those levels of power anyway. 4-5kW induction hobs running on a proper 240V outlet or whatever the Japanese industrial equivalent is are usually plenty for most professional cooking.

Something doesn’t make sense here because an electric kettle operating at 120v at less than 10 amps will boil water much faster than the large burner on my stove.

I can personally guarantee you that the average Japanese コンロ does not have a heat output that would require 15kW of power to match using IH.

And that’s before we get into the safety features of modern ones that bring that limit even lower.

Most Japanese household stoves top out at 5kW per burner. IH stoves are limited to 3kW per burner for 5.8kW combined by radio regulations. 15kW is a figure for combined output or for restaurant burners.

It's apparently not great but not substantially worse either, and it's not like 5kW output of gas stoves are plenty for serious cooking in the first place so it's okay.

Most heat from gas burners is wasted heating the room. Induction is vastly more efficient.

> For example to replicate a gas burner you have to have above 15KW continious power.

Where are you getting this from? 15K BTU sure, but 15K watts? Do you mean the entire stove?